Product Description
Brake Master Cylinder for Honda Accord OEM 46100SDAA01
Related questions
1.What’s the difference between a master cylinder and a wheel cylinder?
Simply put, the master cylinder generates hydraulic pressure that is transmitted via the brake fluid to either the wheel cylinder, in drum brakes, or the brake caliper, in disc brakes. These cylinders then exert mechanical pressure on the shoes or pads, and ultimately stop the vehicle.
2.Is there a way to test your master cylinder?
One way to test a brake master cylinder is to press the brake pedal for a minute. If the pedal drops, then there’s a problem. You can also test the brake master cylinder while observing the brake fluid tank. If the fluid behaves abnormally when brakes are pressed, then there’s likely an issue.
3.What Is A Brake Master Cylinder?
The brake master cylinder is a device that converts the brake pedal’s force into hydraulic pressure used to activate the brake calipers. The brake master cylinder is typically located near the brake pedal and is connected to the brake pedal through a push rod.
4.Do I need to bleed my brakes after installing a new master cylinder?
Remove the master cylinder from the vise and install on the vehicle, leaving the plugs installed. Remove one plug at a time and connect the steel brake lines from the vehicle to the master cylinder. The wheel cylinders and calipers must now be bled to remove any remaining air from the system.
Product Information
|
Product Name
|
Brake Master Cylinder
|
|
OE Number
|
46100SDAA01
|
|
Reference Numbers
|
M630295, 133089, PMF726, MC053, NM55139, MPA
|
|
Vehicle Fitment
|
Honda Accord 2003-2007 (Only fits L4 2.4L)
|
|
Number of Outlets
|
2
|
|
Material
|
Aluminum Alloys 101
|
|
Bore Diameter
|
0.813 inch
|
|
Outlet Specifications
|
Rearward Outlet: M10 X 1.0; Secondary Outlet: M10 X 1.0
|
|
Fluid Type
|
DOT 3 or DOT 4
|
|
Mounting Hole QTY
|
2
|
|
Plug Specifications
|
BK00145, M10X1(2)
|
Hipsen’s Advantages
DRIVE WITH CONFIDENCE
