Tracking pixel for Facebook page view

Understand Car Power Steering Wheel Knuckle System in Just 3 Minutes

Jul 31, 2025
View: 441

Understand Car Power Steering Wheel Knuckle System in Just 3 Minutes

I still remember when I was learning to drive many years ago, driving a Dongfeng truck. The heavy steering wheel knuckle made moving the truck into the warehouse extremely painful. The girls in my class even cried because they couldn’t turn the truck. I still remember it. Many early cars didn’t have power steering, making them difficult to drive, especially when turning on the spot. Today, almost all passenger cars have power knuckle steering, making driving much easier and simpler.

Today, I’ll give you a brief introduction to power steering. Everyone knows that when a car turns, there is tremendous friction between the tires and the road. Without power steering, a significant amount of force is required. Large vehicles are heavy. Without power steering, it would be almost impossible to steer them. The invention of power steering was welcomed largely by big vehicles in its early days. Afterward, small cars adopted it widely. Driving became easier, more agile and significantly improved driving safety.

The division of power steering is based on the source of the power. It can be mechanical hydraulic, electric hydraulic or electric.

 

Hydraulic Power Steering (HPS)

The hydraulic power steering system consists of a hydraulic power pump, oil pipes, a pressure fluid control valve, a V-belt, and an oil tank. This type of power steering practiced from the 1950s to 2000s was hydraulic assistance. There are some downsides to this type of system, it wastes energy, as the pump is running continuously, even when the vehicle is running directly and no further assistance is required.

In this hydraulic system with hydraulic pumps driven by engines and hydraulic cylinders are utilized to increase the steering wheel input force which decreases the effort required to drive the front wheels of the vehicle.

HPS

Hydraulic Power Steering Working

When the operator gives input by rotating the steering wheel, the hydraulic pump driven by the engine starts pumping the compressed hydraulic fluid by means of lines. The hydraulic pressure given by the pump inserts the hydraulic cylinder which applies pressure to the piston.

Now the piston which is in high pressure begins moving from one end to the other which pushes the fluid forward through the forward lines, with this action of the piston the input force exerted by the driver is repeated many times.

The high-pressure fluid carried by the hydraulic cylinder then exerts pressure on the connected pinion via a coupling mechanism that applies force to the rack The gear and steering action occur at the front wheels.

 

Advantages and Disadvantages of Hydraulic Power Steering

The advantages of mechanical hydraulic power steering are its mature technology and high reliability.

The disadvantages are its complex structure and high maintenance costs (steering oil changes are required). Furthermore, the mechanical hydraulic power knuckle steering system cannot adjust the power steering force. At high speeds, the fixed power steering force makes steering too sensitive, increasing driving risks. Furthermore, the hydraulic power steering system is directly connected to the engine and cannot operate independently. While the vehicle is in motion, steering is not always required, and the engine constantly drives the oil pump. The constant oil circulation causes engine energy loss and contamination of the power steering fluid.

 

Electric Hydraulic Power Steering

Electric Hydraulic Power Steering is referred to as EHPS. The main components of the electric hydraulic power steering system have a lot in common with HPS. On the basis of hydraulic pump, oil pipe, pressure fluid control valve, V-type transmission belt, oil storage tank, hydraulic reaction device and fluid distribution valve are added, and the electronic control system including power steering ECU, solenoid valve and vehicle speed sensor are also added.

 

EHPS

 

Working principle of EHPS

The major difference between the electro-hydraulic power steering and the mechanical hydraulic power steering is in the method of driving their oil pressure pump. In the mechanical hydraulic power steering, its hydraulic pump is driven directly by an engine belt, but in that of the electro-hydraulic power steering, it applies an electronic pump that is electrically driven. The electro-hydraulic power steering unit’s electronic controller manages the flow rate of the pump to manage the quantity of support provided. But, electro-hydraulic systems increase both intricacy and cost regarding the steering setup. They can’t fix all problems found in hydraulic power assist setups like poor efficiency, a lot of energy usage, as well as issues with oil getting dirty.

At low speeds, maximum power assist gives easy steering to the driver, hence makes encouraging agility. At higher speeds, reduced power assistance increases the effort of the driver and adds a distinct “road feel.” This ensures both comfortable and agile steering, while also enhancing stability and a sense of security at high speeds. This balance of ease and stability is achieved, resolving the conflict between ease and agility to a certain extent.

 

Advantages and Disadvantages of EHPS

The electronic pump of an electro-hydraulic power steering system has the advantage of not consuming engine power. The pump is electronically controlled and shuts down when steering is not required, reducing energy consumption. The electronic control unit of the electro-hydraulic power steering system adjusts the flow rate of the pump to adjust the amount of steering assistance. However, electro-hydraulic systems make the steering system more complex and expensive, and they still cannot overcome the shortcomings of hydraulic power steering systems, such as low efficiency, high energy consumption, and oil contamination.

 

Electronic Power Steering

Electric Power System (EPS) is abbreviated as EPS. It primarily consists of a signal collection sensor, an electronic control unit, an actuator motor, and a torque-reduction mechanism. Its structure is simple. Electric power steering (EPS) is the model in today’s new cars.

Electric power steering (EPS) is the model in today’s new cars. It is the most advanced type of power steering system. In this, the hydraulic system is fully restored with electric motors and sensors from hydraulic power steering.

Rather than using hydraulic force, the motor powered by the vehicle’s battery uses the force on the steering gear. The steering gear and torque provided by the motor are controlled by the sensor detecting the position of the steering column.

 

 

Working principle of Electronic Power Steering

When the driver provides the input through the steering wheel, the electronic sensors connected to the steering column read the input and send them to the vehicle’s electric control unit.

The vehicle’s ECU analyzes these inputs and gives a voltage signal to the electric motor located at the end of the steering column that gears are in a continuous mesh with the pinion gear.

These voltage signals sent by the ECU start the motor driven by the vehicle’s battery and provide special torque according to the value of the received voltage signals.

The motor is followed by a gear that is in constant mesh with the pinion gear, which begins to transmit manifold torque to the pinion gear which uses torque to the rack through which it is connected. With this torque mounted by the pinion on the rack, the rack moves which rotates the front wheels as required.

The advantages of electronic power steering are compact structure, easy layout, and light steering, but the torque it exerts is limited and the loss of road feel is very serious, so some performance cars still use hydraulic power steering.

 

The differences between Electric Power Steering (EPS) and Hydraulic Power Steering (HPS)

 

400142942R

 

Summary

When purchasing a vehicle, it’s worth carefully examining the specifications. The power steering options will be listed, such as hydraulic, electric, or electronic. Those who prioritize driving quality should opt for hydraulic power, while those who prioritize comfort should consider electronic power.

If you are looking for a automotive brake parts supplier, please contact us. Hipsen (Quzhou) Brake System Parts Co., Ltd (HBS) is a professional brake parts manufacturer with a strong supply chain to provide aftermarket car/motorcycle brake parts you need.

 

Back List
Prev Post : North America Automotive Brakes Market Size Growth Forecast 2025 - 2034 Next Post: How does the brake pedal work?
LEAVE A REPLY
Your email address will not be published. Required fields are marked *

    Save my name, email, and website in this browser for the next timel comment.