Product Description

Main Brake Pump Master Cylinder Fit For CFMOTO CF400ATR 400AU 500ATR 500AU 450S ATV UTV PARTS 9CR6-081100

The Yamaha Warrior 350 rear brake master cylinder (part #3GD-2583V-10-00) operates by converting foot pedal force into hydraulic pressure, which activates the rear brake caliper to slow or stop the ATV. Designed for Yamaha Warrior 350 YFM350X models from 1990 to 2004, this component is essential for off-road and recreational ATV use, ensuring safety and control in diverse terrains.

Distributors benefit from reliable inventory—standard products ship within 24 hours, while custom master cylinder upgrades take just 7 days.

Related Questions

1.Do I need to bleed my brakes after installing a new master cylinder?

Remove the master cylinder from the vise and install on the vehicle, leaving the plugs installed. Remove one plug at a time and connect the steel brake lines from the vehicle to the master cylinder. The wheel cylinders and calipers must now be bled to remove any remaining air from the system.

2.How do I tell if I have air in my master cylinder?

If the pedal is spongy, the master cylinder is likely the issue. If the pedal is hard to press, the brake booster may be failing.

3.How to get air out of master cylinder without removing?

Pump/hold – The brake pedal is held down with the bleeder screw open to let the air out. Pressure – With a pressure pump attached to the master cylinder, bleeder valves are opened to remove the air. Reverse – The pump forces fluid from the bleeder valve back out of the master cylinder.

4.How does a motorcycle rear brake master cylinder work?

The master cylinders on both the front and the rear of the bike are basically the same – a piston that pushes brake fluid down the lines to the caliper (the slave), in turn forcing the pistons out to press the brake pads against the disc.

5.Which brake master cylinder manufacturers are there in China?

Chinese Brake Master Cylinder Manufacturers

Hipsen specializes in producing brake master cylinders and brake wheel cylinders that meet global aftermarket original equipment (OE) standards. Our factory has successfully passed the IATF 16949 quality system audit, and all production and testing equipment meets the current automotive quality system requirements used in the global automotive industry.